SHOCK ABSORBER
4WD only. Shock absorbers adjusted to suit the characteristics of each model.
Scroll
A standard lineup that pursues the performance required of a 4WD
This shock absorber is designed for shock absorption performance and ride comfort, and has been adjusted to meet the characteristics of each 4WD model.
Please try out the Big Country's standard lineup, including models with damping adjustment.
Use the damping force adjustment mechanism.
From on-road to rugged off-road, there are a wide variety of environments in which 4WDs can operate.
By adjusting the damping force of the shock absorber to the optimum value according to the driving environment, the true potential of the vehicle can be brought out even more.
Basic knowledge about damping force adjustment and tips for adjusting to the optimum value are summarized in "Recommendations for Damping Force Adjustment". Please take a look.
New shock absorber mechanism for both ride comfort and handling stability
Frequency-sensitive shock absorber "HARMO-FLEX" is adopted (*on some models)
"HARMO-FLEX" is a frequency-sensitive shock absorber, a new shock absorber mechanism developed by KYB Corporation to achieve both ride comfort and driving stability, and mass production of which began in 2009.
With conventional shock absorbers, the damping force is almost constant even if the vibration frequency changes as long as the speed remains the same.
On the other hand, "HARMO-FLEX" reduces the vibration of the vehicle body by setting the damping force lower than that of conventional shock absorbers for vibration frequencies of 3Hz or higher, which is the frequency at which humans perceive ride comfort to be good or bad.
Conversely, the damping force is set higher than that of conventional shock absorbers when the resonance frequency on the spring is below about 1.5Hz. This prevents deterioration of handling stability due to insufficient rise of damping force.
In this way, by automatically changing the damping force according to the vibration frequency of the road surface and vehicle body, the vehicle's handling stability can be enhanced while ride comfort can be greatly improved.
*Depending on the model of car, changing the ride height by installing our ride height adjustment parts may also require changing the settings of the cameras, sensors, and radars installed in the car. If not properly adjusted, the various safety equipment (such as collision avoidance and other driving support systems) in the car may not operate properly. Also, please note that there is a possibility that the vehicle will not meet the front side visibility standard (Article 44, Paragraph 5 of the safety standard).
*We are not responsible for any accidents caused by the malfunction of the camera, sensor, radar, or driver assistance system due to the installation of our parts. Please understand beforehand.
SHOCK ABSORBER LINE-UP
TOYOTA
LAND CRUISER 60 and 70
-
- Item Number
- CWF007
- Compatibility
- LAND CRUISER 70 / J7#series / Nov.1984-Jul.1999
LAND CRUISER 60 / J6#series / Sept.1987-Sept.1989
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 632
- Minimum Length(mm)
- 380
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / 0 to +30mm
Land Cruiser 60 J6#series / +50 to +80mm
-
- Item Number
- CWF008
- Compatibility
- LAND CRUISER 70 / J7#series / Nov.1984-Jul.1999
LAND CRUISER 60 / J6#series / Sept.1987-Sept.1989
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 663
- Minimum Length(mm)
- 397
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / +50 to +80mm
Land Cruiser 60 J6#series / +80 to +100mm
-
- Item Number
- CWR012
- Compatibility
- LAND CRUISER 70 / J7#series / Nov. 1984-July 1999
HZJ70series / Aug.1999-
LAND CRUISER 60 / J6#series / Sept.1987-Sept.1989
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 657
- Minimum Length(mm)
- 404
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650 incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / +50 to +90mm
Land Cruiser 70 HZJ70series / 0 to +70mm
Land Cruiser 60 J6#series / +70 to +90mm
-
- Item Number
- CEF040
- Compatibility
- LAND CRUISER 70 / J7#series / Nov.1984-Jul.1999
LAND CRUISER 60 / J6#series / Sept.1987-Sept.1989
for Front
- Machanism
- Low-pressure twin-tube
8-level damping force adjustment
- List price(Tax included)
- 20,500yen/one (22,550yen/one)
- Maximum Length(mm)
- 655
- Minimum Length(mm)
- 390
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / +50 to +70mm
Land Cruiser 60 J6#series / +50 to +75mm
-
- Item Number
- CER041
- Compatibility
- LAND CRUISER 70 / J7#series / Nov.1984-Jul.1999
LAND CRUISER 60 / J6#series / Sept.1987-Sept.1989
for Rear
- Machanism
- Low-pressure twin-tube
8-level damping force adjustment
- List price(Tax included)
- 20,500yen/one (22,550yen/one)
- Maximum Length(mm)
- 647
- Minimum Length(mm)
- 395
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / +50 to +70mm
Land Cruiser 60 J6#series / +50 to +75mm
LAND CRUISER 70
-
- Item Number
- CWR011
- Compatibility
- LAND CRUISER 70 / J7#series / Nov.1984-Jul.1999
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 627
- Minimum Length(mm)
- 387
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / 0 to +30mm
-
- Item Number
- CWF048
- Compatibility
- HZJ7#series / (for Front Coil Vehicles)(Aug.1999-)
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 539
- Minimum Length(mm)
- 327
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Corresponding lift capacity:
Land Cruiser 70 J7#series / 0 to +70mm
-
- Item Number
- CEF045H
- Compatibility
- GRJ7#series / Aug.2013-
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 22,500yen/one (24,750yen/one)
- Maximum Length(mm)
- 545
- Minimum Length(mm)
- 342
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Cannot be installed at stock ride height
Corresponding lift capacity:
Land Cruiser 70 GRJ7#series / +40 to +60mm
-
- Item Number
- CER046H
- Compatibility
- GRJ7#series / Aug.2013-
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 22,500yen/one (24,750yen/one)
- Maximum Length(mm)
- 690
- Minimum Length(mm)
- 429
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Cannot be installed at stock ride height
Corresponding lift capacity:
Land Cruiser 70 GRJ7#series / +40 to +60mm
-
- Item Number
- CEF047H
- Compatibility
- GRJ7#series / Aug.2013-
for Front
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 22,500yen/one (24,750yen/one)
- Maximum Length(mm)
- 490
- Minimum Length(mm)
- 330
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
For stock ride height
Corresponding lift capacity:
Land Cruiser 70 GRJ7#series / 0 to +20mm
-
- Item Number
- CER048H
- Compatibility
- GRJ7#series / Aug.2013-
for Rear
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 22,500yen/one (24,750yen/one)
- Maximum Length(mm)
- 655
- Minimum Length(mm)
- 412
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650 incl. tax)
For stock ride height
Corresponding lift capacity:
Land Cruiser 70 GRJ7#series / 0 to +20mm
-
- Item Number
- S1076-4748-65
- Compatibility
- GDJ76 / Dec.2023-
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 107,000yen/Kit for 1 car
(117,700yen/Kit for 1 car)
- Maximum Length(mm)
- Front 490
Rear 655
- Minimum Length(mm)
- Front 330
Rear 412
- Attached Parts
- Rear bump stopper extension stopper
Big Country Equip Shock boots (Part No. SAB17BL)
- notes
- 0 to +20mm
Rear bump stopper extension spacer (single item)
Item No.: CS-065
List price: 11,000yen(12,100yen)
Thickness of spacer: 20mm
-
- Item Number
- S1076-4748-6566
- Compatibility
- GDJ76 / Dec.2023-
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
Built-in HARMO-FLEX function
- List price(Tax included)
- 122,800yen/Kit for 1 car
(￥135,080yen/Kit for 1 car)
- Maximum Length(mm)
- Front 490
Rear 655
- Minimum Length(mm)
- Front 330
Rear 412
- Attached Parts
- Front coil spacer
Rear bump stopper extension stopper
Big Country Equip Shock boots (Part No. SAB17BL)
- notes
- 0 to +20mm
Rear bump stopper extension spacer (single item)
Item No.: CS-065
List price: 11,000yen(12,100yen)
Thickness of spacer: 20mm
Front coil spacer (single item)
Item No.: CS066
List price: 15,800yen(17,380yen)
Lift: 15mm
LAND CRUISER 80
-
- Item Number
- S1080-2324
- Compatibility
- LAND CRUISER 80
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 72,000yen (79,200yen)/Set of 4
- Maximum Length(mm)
- Front/640
Rear/615
- Minimum Length(mm)
- Front/372
Rear/368
- notes
- Big Country Shock Boots (part number SAB17BL) included
-
- Item Number
- CWF023
- Compatibility
- LAND CRUISER 80
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 640
- Minimum Length(mm)
- 372
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
-
- Item Number
- CWR024
- Compatibility
- LAND CRUISER 80
for Rear
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen (18,150yen)
- Maximum Length(mm)
- 615
- Minimum Length(mm)
- 368
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
LAND CRUISER 100
-
- Item Number
- CWF043(for Front)
- Compatibility
- HDJ101K/UZJ100W Jan.1998-Jul.2007
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 17,500yen/one (19,250yen/one)
- Maximum Length(mm)
- 452
- Minimum Length(mm)
- 292
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650 incl. tax)
Not for AHC&Skyhook TEMS vehicles
Compatible lifts: Land Cruiser 100 / 0 to +75mm
-
- Item Number
- CWR044(for Rear)
- Compatibility
- HDJ101K/UZJ100W / Jan.1998-Jul.2007
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 17,500yen/one (19,250yen/one)
- Maximum Length(mm)
- 623
- Minimum Length(mm)
- 379
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650 incl. tax)
Not for AHC&Skyhook TEMS vehicles
Compatible lifts: Land Cruiser 100 / 0 to +75mm
LAND CRUISER PRADO
-
- Item Number
- CWF039
- Compatibility
- LAND CRUISER PRADO / J9#series / May 1996-Sept.2002
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 470
- Minimum Length(mm)
- 326
- notes
- Big Country Shock Boots (part number SAB17BL) included
Compatible lift: Prado J9#series/+20 to +50mm
-
- Item Number
- CWR040
- Compatibility
- LAND CRUISER PRADO / J9#series / May 1996-Sept.2002
for Rear
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 530
- Minimum Length(mm)
- 338
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Compatible lift: Prado J9#series/+20 to +50mm
HILUX SURF
-
- Item Number
- CWF039
- Compatibility
- HILUX SURF / N185series / Dec.1995-Oct.2002
for Front
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 470
- Minimum Length(mm)
- 326
- notes
- Big Country Shock Boots (part number SAB17BL) included
Compatible lift: HILUX SURF N185series/+20 to +50mm
-
- Item Number
- CWR040
- Compatibility
- HILUX SURF / N185series / Dec.1995-Oct.2002
for Rear
- Machanism
- Low-pressure twin-tube
- List price(Tax included)
- 16,500yen/one (18,150yen/one)
- Maximum Length(mm)
- 530
- Minimum Length(mm)
- 338
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
FJ CRUISER
-
- Item Number
- CEF042-AJ
- Compatibility
- FJ CRUISER / GSJ15W / Nov.2010-
for Front
- Machanism
- 40-level damping force adjustment
Ride height adjustable
Low-pressure twin-tube
- List price(Tax included)
- 38,000yen/one (41,800yen/one)
- Maximum Length(mm)
- 572
- Minimum Length(mm)
- 450
- notes
- Big Country Shock Boots (part number SAB17BL) included
-
- Item Number
- CER044
- Compatibility
- FJ CRUISER / GSJ15W / Nov.2010-
for Rear
- Machanism
- 14-level damping force adjustment
Low-pressure twin-tube
Built-in HARMO-FLEX function
- List price(Tax included)
- 22,000yen/one (24,200yen/one)
- Maximum Length(mm)
- 590
- Minimum Length(mm)
- 355
- notes
- Big Country Shock Boots (Part No. SAB17BL) sold separately (1,650yen incl. tax)
Compatible lifts: FJ GSJ15W/+20 to +50mm
BIG COUNTRY Shock Boots
-
- Item Number
- SAB09BL
- Compatibility
- general purpose
- List price(Tax included)
- 1,500yen/one (1,650yen/one)
- notes
- *The picture shows 2 pieces.
-
- Item Number
- SAB17BL
- Compatibility
- general purpose
- List price(Tax included)
- 1,500yen/one (1,650yen/one)
- notes
- *The picture shows 2 pieces.
SUZUKI
JIMNY(JB64 / JB74)
-
- Item Number
- S4674-4950
- Compatibility
- JIMNY JB64/74 series
for Front & Rear
- Machanism
- 14-level damping force adjustment
Built-in HARMO-FLEX function (front)
- List price(Tax included)
- 80,000yen (88,000yen) / Set of 4
- Maximum Length(mm)
- 440
- Minimum Length(mm)
- 294
- notes
- 0 to about 30 mm up
-
- Item Number
- CEF049H
- Compatibility
- JIMNY JB64/74 series
for Front
- Machanism
- 14-level damping force adjustment
Built-in HARMO-FLEX function (front)
- List price(Tax included)
- 22,000yen/one (24,200yen/one)
- Maximum Length(mm)
- 440
- Minimum Length(mm)
- 294
- notes
- 0 to about 30 mm up
-
- Item Number
- CER050
- Compatibility
- JIMNY JB64/74 series
for Rear
- Machanism
- 14-level damping force adjustment
- List price(Tax included)
- 18,000yen/one (19,800yen/one)
- Maximum Length(mm)
- 475
- Minimum Length(mm)
- 307
- notes
- 0 to about 30 mm up
-
- Item Number
NEW!
S4674-5556
- Compatibility
- JIMNY JB64/74 series
for Front & Rear
- Machanism
- 14-level damping force adjustment
Built-in Harmo-flex function
- List price(Tax included)
- 87,000yen/Set of 4 (98,700yen／Set of 4)
- Maximum Length(mm)
- Front 495
Rear 540
- Minimum Length(mm)
- Front 322
Rear 340
- notes
- For 70mm up, Rear shock spacer (Part No. CS-052) included
-
- Item Number
NEW!
CEF055H
- Compatibility
- JIMNY JB64/74 series
for Front
- Machanism
- 14-level damping force adjustment
Built-in Harmo-flex function
- List price(Tax included)
- 23,000yen/one (25,300yen／one)
- Maximum Length(mm)
- 495
- Minimum Length(mm)
- 322
- notes
- For 70mm up
-
- Item Number
NEW!
CER056H
- Compatibility
- JIMNY JB64/74 series
for Rear
- Machanism
- 14-level damping force adjustment
Built-in Harmo-flex function
- List price(Tax included)
- 20,000yen/one (22,000／one)
- Maximum Length(mm)
- 540
- Minimum Length(mm)
- 340
- notes
- For 70mm up
JIMNY(JB23)
-
- Item Number
- CWJF005
- Compatibility
- JIMNY JB23series / Oct.1998-
for Front
- Machanism
- List price(Tax included)
- 12,000yen/one (13,200yen/one)
- Maximum Length(mm)
- 460
- Minimum Length(mm)
- 282
- notes
- 0-2 inches up
-
- Item Number
- CWJR006
- Compatibility
- JIMNY JB23series / Oct.1998-
for Rear
- Machanism
- List price(Tax included)
- 12,000yen/one (13,200yen/one)
- Maximum Length(mm)
- 504
- Minimum Length(mm)
- 311
- notes
- 0-2 inches up
-
- Item Number
- CEF028-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Front
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,000yen/one (19,800yen/one)
- Maximum Length(mm)
- 460
- Minimum Length(mm)
- 307
- notes
- Big Country Equip.
2 inches up
-
- Item Number
- CER029-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Rear
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,000yen/one (19,800yen/one)
- Maximum Length(mm)
- 504
- Minimum Length(mm)
- 331
- notes
- Big Country Equip.
2 inches up
-
- Item Number
- CEF030-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Front
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,000yen/one (19,800yen/one)
- Maximum Length(mm)
- 415
- Minimum Length(mm)
- 280
- notes
- Big Country Equip.
Compatible with normal vehicle height
-
- Item Number
- CER031-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Rear
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,000yen/one (19,800yen/one)
- Maximum Length(mm)
- 460
- Minimum Length(mm)
- 309
- notes
- Big Country Equip.
Compatible with normal vehicle height
-
- Item Number
- S4023-3031
- Compatibility
- JIMNY JB23series / Oct.1998-
Front and Rear
- Machanism
- 低圧複筒式
減衰力14段調整式
- List price(Tax included)
- 72,000yen/car (79,200yen/car)
- Maximum Length(mm)
- Front 415
Rear 460
- Minimum Length(mm)
- Front 280
Rear 309
- notes
- Big Country Equip.
Compatible with normal vehicle height
-
- Item Number
- CEF035-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Front
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,800yen/one (20,680yen/one)
- Maximum Length(mm)
- 495
- Minimum Length(mm)
- 320
- notes
- Big Country Equip.
3 inches up
-
- Item Number
- CER036-14
- Compatibility
- JIMNY JB23series / Oct.1998-
for Rear
- Machanism
- Low-pressure twin-tube
14-level damping force adjustment
- List price(Tax included)
- 18,800yen/one (20,680yen/one)
- Maximum Length(mm)
- 540
- Minimum Length(mm)
- 349
- notes
- Big Country Equip.
3 inches up
JIMNY(Others)
-
- Item Number
- CWJF001
- Compatibility
- JIMNY JA11,JA71,SJ30,SJ40 series / Apr.1980-Oct.1995
for Front
- Machanism
- List price(Tax included)
- 12,000yen/one (13,200yen/one)
- Maximum Length(mm)
- 472
- Minimum Length(mm)
- 290
- notes
- 0-2 inches up
-
- Item Number
- CWJR002
- Compatibility
- JIMNY JA11,JA71,SJ30,SJ40 series / Apr.1980-Oct.1995
for Rear
- Machanism
- List price(Tax included)
- 12,000yen/one (13,200yen/one)
- Maximum Length(mm)
- 471
- Minimum Length(mm)
- 296
- notes
- 0-2 inches up
-
- Item Number
- S4022-0304
- Compatibility
- JIMNY JA12,JA22 / Nov.1995-Sept.1998
- Machanism
- List price(Tax included)
- 54,000yen/car (59,400yen/car)
- Maximum Length(mm)
- Front 432
Rear 390
- Minimum Length(mm)
- Front 273
Rear 257
- notes
- 0-1 inches up
Set for front and rear
MITSUBISHI
DELICA D:5(CV1W after minor changes in February 2019)
-
- Item Number
- S3051-5138
- Compatibility
- CV1W / Feb.2019-
- Machanism
- Low speed range high damping valves「HLS valves」(Front)
8-level damping force adjustment (rear)
- List price(Tax included)
- 125,000yen/4-piece set (137,500yen/4-piece set)
- Maximum Length(mm)
- Front：546.5
Rear：485
- Minimum Length(mm)
- Front：404.3
Rear：320
- notes
- Supported lifts: 0 to +30mm